[CVRC] Antennas/H-frame sold--other items FS

Jack/W6NF vhfplus at gmail.com
Wed Jun 13 17:03:38 EDT 2012


The 2-meter and 432 yagis are gone, as is the H-frame. Only the Lunar 
Electronics/TET tower remains. I am, however, adding two items. I've 
decided to forgo 432 operation and buy the internal 2-meter transverter 
for my K3 so I have an IC-290H and IC-451A available.

1) Lunar Electronics/TET LT-1 "portable modular antenna tower" (as 
described in the advertising flyer). 11-foot total height for base and 
one tower section. This would be ideal for the 432 EME array but I don't 
know if it would hold the 2-meter array. Includes a rotor shelf for 
Ham-M-style rotors and a 2-inch thrust bearing but the bearing operates 
*very* rough and may or may not be repairable. $100.00 for everything.

2) ICOM IC-290H 25-watt multi-mode transceiver, good condition, with DC 
cord and mic. No CTCSS. $150.00

3) ICOM IC-451A 10-watt 430-440 multi-mode transceiver with internal AC 
supply. Very nice condition except for a bit of rust on the access cover 
on top where the paint was abraded. Comes with AC cord and mic. There is 
a 4-pin molex plug in the DC power connector on the rear of the radio 
that has the jumper for, I believe, using the internal supply. Someone 
has cut the DC leads off the connector, at pins 1 and 4, and it should 
be replaced if mobile operation is anticipated. No CTCSS and, remember, 
this is a 430-440MHz radio. $230.00 and I will throw in a home-brew 432 
long yagi.

All items pickup only in Silver Springs, NV. May consider shipping the 
'290 but not the '451 and antenna.

Thanks,

-- 
Jack, W6NF
Silver Springs, NV
DM09ji

775-997-8129 (cell)



More information about the CVRC mailing list