[CVRC] 144/432MHz antennas/H-frame/roof-top tower FS

[Jack/W6NF]

I have 4 yagi arrays for both 2-meters and 70cm available. I also have 
an H-frame, linear actuator and controller for sale. These antennas were 
used by NC7K/K7XC on EME from 1991-1999. All items are local pickup in 
Silver Springs, NV.

1) 432MHz array is a 25 element version of the K1FO-design, in good 
condition. I just replaced all N-connectors and the only remaining work 
needed is replacement of one stand-off insulator. The antennas also need 
a few of the 3/16-in retainer clips and insulators to finish remounting 
elements. $200.00 including a home-brew 4-port power divider.

2) 144MHz array is a 13-element design, I think from DJ9BV. One yagi is 
complete and functioning but the other three require varying degrees of 
work from driven element repair/replacement to parasitic element 
replacement. Boom sections are complete and in good condition. $125.00 
including a home-brew 4-port power divider.

3) H-frame assembly with linear actuator for elevation control. 
Boom-boom/boom-mast clamps should be replaced. $200.00. I have a couple 
of jpg images of the H-frame as it was used by K7XC if an interested 
buyer wants to see them.

4) Lunar Electronics/TET LT-1 "portable modular antenna tower" (as 
described in the advertising flyer). 11-foot total height for base and 
one tower section. This would be ideal for the 432 EME array but I don't 
know if it would hold the 2-meter array. Includes a rotor shelf for 
Ham-M-style rotors and a 2-inch thrust bearing but the bearing operates 
*very* rough and may or may not be repairable. $100.00 for everything.

-- 
Jack, W6NF
Silver Springs, NV
DM09ji

775-997-8129 (cell)