[Collins] 30L-1 switching

[David Knepper]

Can anyone help Lyle when he uses a 30L-1 with a FT-920 transceiver.  =
Thanks

Lyle:  Look at your manual on the 920 and try to find where it mentions =
an external jack on the 920 being used to switch an external relay to be =
used when switching an amplifier relay circuit.  I would suspect that =
there is a 12 volt switching line that can be used with an external =
relay, 12 volt relay.  Incidentally, Yaesu sold such a relay box that =
plugged into a 12 volt plug on their equipment.  The relays in many of =
these solid-state transceivers are too light to switch a Collins 30L-1.

I am going to place your need on the QTH.NET Collins mail list and hope =
that someone knows how to hook up the TS-920 to the 30L-1.

David Knepper - W3ST
Secretary to the Collins Radio Association (CRA)
Publisher of the Collins Journal
www.collinsra.com
CRA station call - W3CRA
  ----- Original Message -----=20
  From: MEEKLYLE@aol.com=20
  To: cra@floodcity.net=20
  Sent: Tuesday, February 25, 2003 5:34 PM
  Subject: Re: 30L-1


  Thank you for the prompt reply.

  Is there a specific relay or part number I should get.

  I have found the amp for $400...and I am hoping that is a good price.

  Will keep the 811a.

  73,
  Lyle W6WF/5=20


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---