[Clegg] Clegg Thor info needed

[Eugene Balinski]

Jim.

    That is what I figured.  Thanks for the info.

73

Gene K1NR


On Thu, 13 Jun 2013 05:59:35 -0700
 jim lockwood <jmlckwd at gmail.com> wrote:
> Gene,
> 
> I was in a similar situation as you with my Thor:  I
> needed a cable because my RF deck and modulator/PS came
> from different sources.
> 
> I made my own cable.
> 
> For the audio, I had to use a shielded pair, as you
> suspected.  Otherwise there was 60 cycle hum.   I also
> twisted together the two wires for switched AC.
>  Otherwise all the connections were ordinary, stranded
> hook-up wire run straight.
> 
> Never a problem with this cable, altho it isn't very
> pretty.  If it would help, I could make a photo of it for
> you.
> 
> 73,
> 
> Jim - k4ccf
> 
> 
> At 04:53 PM 6/11/2013, Eugene Balinski wrote:
> >All,
> >
> >    I have a Clegg Thor that I am trying to get back on
> the
> >air.  Unfortunately the radio - power supply cable is
> >missing.
> >
> >    I have located the Cinch connectors to make the
> cable,
> >however I was wondering if anyone have a recommendation
> for
> >a good quality 12 conductor cable, perhaps with a
> shielded
> >pair for the audio ?
> >
> >73 es thanks,
> >
> >     Gene K1NR
>
>---------------------------------------------------------------------
> >Web mail provided by NuNet, Inc. The Premier National
> provider.
> >http://www.nni.com/
>
>______________________________________________________________
> >Clegg mailing list
> >Home: http://mailman.qth.net/mailman/listinfo/clegg
> >Help: http://mailman.qth.net/mmfaq.htm
> >Post: mailto:Clegg at mailman.qth.net
> >
> >This list hosted by: http://www.qsl.net
> >Please help support this email list:
> http://www.qsl.net/donate.html
> 

---------------------------------------------------------------------
Web mail provided by NuNet, Inc. The Premier National provider.
http://www.nni.com/