[Boatanchors] Sticky meter movement...

[Rob Atkinson]

Hi Gary, yep oil I've heard, is not good.  clogs up with dust.

I have the same problem with a sticky Weston VU meter on a speech
amplifier.  In my case it sometimes doesn't kick up with audio.  If I
tap the front plastic cover, that frees it.

73

Rob
K5UJ

On Sat, Jun 30, 2018 at 4:49 PM, Gary Peterson <kzerocx at rap.midco.net> wrote:
> I am resurrecting a Central Electronics 100V transmitter.  It has been in storage for decades.
>
> The panel meter has a sticky movement.  It is of the d’Arsonval type.  When the meter pointer swings upscale it tends to hang.  Tapping the front of the case will return the pointer back to the vicinity of zero.
>
> I have opened the case and everything looks squeaky clean.  Nonetheless, I used gentle amounts of dusting gas in the event that a tiny particle in the wrong place was causing drag.  The pointer is not touching the scale plate at any point.  There is no indication that moisture has been a factor.
>
> I will not do anything further, until I feel that I will not exacerbate the problem.  For instance, watch oil, applied with a toothpick, may cause more trouble.  Also, any attempt to adjust the front pivot or bearing may be counterproductive.
>
> Any advice would be appreciated.  Thanks in advance.
>
> Gary
> K zero CX