[Boatanchors] [Glowbugs] Hot - melt glue on plastic ?

Mon May 29 09:08:49 EDT 2017

Ya - up North here it's even available at Canadian Tire....

 - Bill H. / va3hwa

  <https://mailtrack.io/> Sent with Mailtrack
<https://mailtrack.io/install?source=signature&lang=en&[email protected]&idSignature=22>

On Fri, May 26, 2017 at 11:24 PM, Gary MacGregor (KF5DZQ) <kf5dzq at gmail.com>
wrote:

> Why wait on mail order
>
> Go gitcha some at Walmart or Hobby Lobby
>
> Gray, white and black squeeze tube. With E6000 in big letters on it.
>
> 73
> Gary MacGregor KF5DZQ
>
> Sent from my Stone & Chisel V 3.14
>
> On May 26, 2017 4:52 PM, "Hal Dale" <wb4aeg at zoho.com> wrote:
>
>>
>> Good stuff...use it all the time...Hal/WB4AEG
>>
>> Sent using Zoho Mail <https://www.zoho.com/mail/>
>>
>>
>> ---- On Fri, 26 May 2017 17:47:08 -0400 *Peter Loron
>> <peterl at standingwave.org <peterl at standingwave.org>>* wrote ----
>>
>> Here ya go:
>>
>> https://www.amazon.com/E6000-230010-Craft-Adhesive-Ounces/dp/B007TSYNG8
>>
>>
>> -Pete
>>
>> > On May 26, 2017, at 2:38 PM, Howie WA3MCK <wa3mck at gmail.com> wrote:
>> >
>> > Gang,
>> >
>> > What is this e6000 adhesive stuff everyone is talking about?
>> > Do I need some? Obviously I do... where can I purchase it?
>> >
>> > Tnx es Happy Memorial Day
>> >
>> > de Howie WA3MCK
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> > On Friday, May 26, 2017, Gary MacGregor (KF5DZQ) <kf5dzq at gmail.com>
>> wrote:
>> >
>> >> Steve
>> >> What kind of cure time do you experience with e6000?
>> >>
>> >> In our hot humid atmosphere her in Corpus Christi, Texas it tacks up
>> in a
>> >> few minutes (depending on thickness), doesn't run. And is pretty much
>> done
>> >> in 10-15 minutes. I don't remember what full cure time is. But so far
>> I
>> >> haven't had to worry about that on projects.
>> >> I love the forever weather proof and release when needed properties.
>> And
>> >> low to no vapors or residue.
>> >>
>> >> It should be perfect for his battery project.
>> >>
>> >> 73
>> >> Gary MacGregor KF5DZQ
>> >>
>> >> Sent from my Stone & Chisel V 3.14
>> >>
>> >> On May 26, 2017 11:42 AM, "Steve WB6TNL" <sigcom at juno.com
>> >> <javascript:_e(%7B%7D,'cvml','sigcom at juno.com');>> wrote:
>> >>
>> >>> Hot melt, using an adhesive formulated for adhesion to plastic or
>> plastic
>> >>> bonding, will work fine and cure almost immediately.
>> >>> 3M has lots if info on this online.
>> >>>
>> >>> Finding a vendor for such adhesive may be the bigger problem whereas
>> the
>> >>> liquid adhesives (E6000, Goop, etc.)
>> >>> are practically everywhere. I like these for their adhesive
>> properties
>> >>> but I don't like having to wait for them to cure.
>> >>>
>> >>> 73.......Steve Smith WB6TNL
>> >>> "Snort Rosin"
>> >>>
>> >>> On Thursday, May 25, 2017 at 1:22:53 PM UTC-7, kargocult wrote:
>> >>>>
>> >>>> I have battery holder for the common 9 volt battery. I want to
>> fasten to
>> >>>> the
>> >>>>
>> >>>> backside of it, two small resistors for a voltage divider. My
>> question
>> >>>> is, will
>> >>>>
>> >>>> hot melt glue adhere to the plastic battery holder? If I rough it up
>> a
>> >>>> little with
>> >>>>
>> >>>> sandpaper ? As well as holding down the resistors, I want to cover
>> up
>> >>>> the
>> >>>>
>> >>>> bare wire connections.
>> >>>>
>> >>>> This is for a drop-in addition to old equipment, thus the
>> odd-seeming
>> >>>>
>> >>>> construction. The question is maybe not so dumb as it seems, as I
>> have
>> >>>> found
>> >>>>
>> >>>> in the past that so-called superglue fails to hold on to most
>> plastics.
>> >>>>
>> >>>> thanks-
>> >>>>
>> >>>> Hue
>> >>>>
>> >>> --
>> >>> --
>> >>> ZCZC
>> >>> This is a transmission from the Glowbugs list
>> >>> To unsubscribe from this group, send email to
>> >>> tetrode+unsubscribe at googlegroups.com
>> >>> <javascript:_e(%7B%7D,'cvml','tetrode%2Bunsubscribe at googlegroups.com');>
>>
>> >>> For more options, visit this group at
>> >>> http://groups.google.com/group/tetrode?hl=en
>> >>> NNNN
>> >>>
>> >>> ---
>> >>> You received this message because you are subscribed to the Google
>> Groups
>> >>> "Glowbugs" group.
>> >>> To unsubscribe from this group and stop receiving emails from it,
>> send an
>> >>> email to tetrode+unsubscribe at googlegroups.com
>> >>> <javascript:_e(%7B%7D,'cvml','tetrode%2Bunsubscribe at googlegroups.com');>.
>>
>> >>> For more options, visit https://groups.google.com/d/optout.
>> >>>
>> >> --
>> >> --
>> >> ZCZC
>> >> This is a transmission from the Glowbugs list
>> >> To unsubscribe from this group, send email to
>> >> tetrode+unsubscribe at googlegroups.com
>> >> <javascript:_e(%7B%7D,'cvml','tetrode%2Bunsubscribe at googlegroups.com');>
>>
>> >> For more options, visit this group at
>> >> http://groups.google.com/group/tetrode?hl=en
>> >> NNNN
>> >>
>> >> ---
>> >> You received this message because you are subscribed to the Google
>> Groups
>> >> "Glowbugs" group.
>> >> To unsubscribe from this group and stop receiving emails from it, send
>> an
>> >> email to tetrode+unsubscribe at googlegroups.com
>> >> <javascript:_e(%7B%7D,'cvml','tetrode%2Bunsubscribe at googlegroups.com');>.
>>
>> >> For more options, visit https://groups.google.com/d/optout.
>> >>
>> > ______________________________________________________________
>> > Boatanchors mailing list
>> > Home: http://mailman.qth.net/mailman/listinfo/boatanchors
>> > Help: http://mailman.qth.net/mmfaq.htm
>> > Post: mailto:Boatanchors at mailman.qth.net
>> >
>> > List Administrator: Duane Fischer, W8DBF
>> > ** For Assistance: dfischer at usol.com **
>> >
>> >
>> > This list hosted by: http://www.qsl.net
>> > Please help support this email list: http://www.qsl.net/donate.html
>> >
>>
>> ______________________________________________________________
>> Boatanchors mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/boatanchors
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Boatanchors at mailman.qth.net
>>
>> List Administrator: Duane Fischer, W8DBF
>> ** For Assistance: dfischer at usol.com **
>>
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>> --
> --
> ZCZC
> This is a transmission from the Glowbugs list
> To unsubscribe from this group, send email to
> tetrode+unsubscribe at googlegroups.com
> For more options, visit this group at
> http://groups.google.com/group/tetrode?hl=en
> NNNN
>
> ---
> You received this message because you are subscribed to the Google Groups
> "Glowbugs" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to tetrode+unsubscribe at googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
CONFIDENTIALITY NOTICE:  The information transmitted in this e-mail is 
intended only for the person to whom it is addressed and may contain 
confidential, personal and/or privileged material.  Any distribution, use 
or copying of this e-mail or the information it contains by anyone other 
than the intended recipient(s) is unauthorized.  If you are not the 
intended recipient and have received this communication in error, please 
notify the sender immediately and delete the message and any attachments 
from your system.