[Boatanchors] [Glowbugs] Hot - melt glue on plastic ?

Sun May 28 09:37:04 EDT 2017

Better still - Home Depot! They are everywhere...

Bry

________________________________
From: tetrode at googlegroups.com <tetrode at googlegroups.com> on behalf of Gary MacGregor (KF5DZQ) <kf5dzq at gmail.com>
Sent: Friday, May 26, 2017 11:24 PM
To: Hal Dale
Cc: Glowbugs; Boatanchor group; Howie WA3MCK; Peter Loron; Heathkit; Steve WB6TNL
Subject: Re: [Boatanchors] [Glowbugs] Hot - melt glue on plastic ?

Why wait on mail order

Go gitcha some at Walmart or Hobby Lobby

Gray, white and black squeeze tube. With E6000 in big letters on it.

73
Gary MacGregor KF5DZQ

Sent from my Stone & Chisel V 3.14

On May 26, 2017 4:52 PM, "Hal Dale" <wb4aeg at zoho.com<mailto:wb4aeg at zoho.com>> wrote:

Good stuff...use it all the time...Hal/WB4AEG

Sent using Zoho Mail<https://www.zoho.com/mail/>

---- On Fri, 26 May 2017 17:47:08 -0400 Peter Loron <peterl at standingwave.org<mailto:peterl at standingwave.org>> wrote ----

Here ya go:

https://www.amazon.com/E6000-230010-Craft-Adhesive-Ounces/dp/B007TSYNG8

-Pete

> On May 26, 2017, at 2:38 PM, Howie WA3MCK <wa3mck at gmail.com<mailto:wa3mck at gmail.com>> wrote:
>
> Gang,
>
> What is this e6000 adhesive stuff everyone is talking about?
> Do I need some? Obviously I do... where can I purchase it?
>
> Tnx es Happy Memorial Day
>
> de Howie WA3MCK
>
>
>
>
>
>
>
> On Friday, May 26, 2017, Gary MacGregor (KF5DZQ) <kf5dzq at gmail.com<mailto:kf5dzq at gmail.com>> wrote:
>
>> Steve
>> What kind of cure time do you experience with e6000?
>>
>> In our hot humid atmosphere her in Corpus Christi, Texas it tacks up in a
>> few minutes (depending on thickness), doesn't run. And is pretty much done
>> in 10-15 minutes. I don't remember what full cure time is. But so far I
>> haven't had to worry about that on projects.
>> I love the forever weather proof and release when needed properties. And
>> low to no vapors or residue.
>>
>> It should be perfect for his battery project.
>>
>> 73
>> Gary MacGregor KF5DZQ
>>
>> Sent from my Stone & Chisel V 3.14
>>
>> On May 26, 2017 11:42 AM, "Steve WB6TNL" <sigcom at juno.com<mailto:sigcom at juno.com>
>> <javascript:_e(%7B%7D,'cvml','sigcom at juno.com<mailto:sigcom at juno.com>');>> wrote:
>>
>>> Hot melt, using an adhesive formulated for adhesion to plastic or plastic
>>> bonding, will work fine and cure almost immediately.
>>> 3M has lots if info on this online.
>>>
>>> Finding a vendor for such adhesive may be the bigger problem whereas the
>>> liquid adhesives (E6000, Goop, etc.)
>>> are practically everywhere. I like these for their adhesive properties
>>> but I don't like having to wait for them to cure.
>>>
>>> 73.......Steve Smith WB6TNL
>>> "Snort Rosin"
>>>
>>> On Thursday, May 25, 2017 at 1:22:53 PM UTC-7, kargocult wrote:
>>>>
>>>> I have battery holder for the common 9 volt battery. I want to fasten to
>>>> the
>>>>
>>>> backside of it, two small resistors for a voltage divider. My question
>>>> is, will
>>>>
>>>> hot melt glue adhere to the plastic battery holder? If I rough it up a
>>>> little with
>>>>
>>>> sandpaper ? As well as holding down the resistors, I want to cover up
>>>> the
>>>>
>>>> bare wire connections.
>>>>
>>>> This is for a drop-in addition to old equipment, thus the odd-seeming
>>>>
>>>> construction. The question is maybe not so dumb as it seems, as I have
>>>> found
>>>>
>>>> in the past that so-called superglue fails to hold on to most plastics.
>>>>
>>>> thanks-
>>>>
>>>> Hue
>>>>
>>> --
>>> --
>>> ZCZC
>>> This is a transmission from the Glowbugs list
>>> To unsubscribe from this group, send email to
>>> tetrode+unsubscribe at googlegroups.com<mailto:tetrode+unsubscribe at googlegroups.com>
>>> <javascript:_e(%7B%7D,'cvml','tetrode%2Bunsubscribe at googlegroups.com<mailto:tetrode%2Bunsubscribe at googlegroups.com>');>
>>> For more options, visit this group at
>>> http://groups.google.com/group/tetrode?hl=en
>>> NNNN
>>>
>>> ---
>>> You received this message because you are subscribed to the Google Groups
>>> "Glowbugs" group.
>>> To unsubscribe from this group and stop receiving emails from it, send an
>>> email to tetrode+unsubscribe at googlegroups.com<mailto:tetrode+unsubscribe at googlegroups.com>
>>> <javascript:_e(%7B%7D,'cvml','tetrode%2Bunsubscribe at googlegroups.com<mailto:tetrode%2Bunsubscribe at googlegroups.com>');>.
>>> For more options, visit https://groups.google.com/d/optout.
>>>
>> --
>> --
>> ZCZC
>> This is a transmission from the Glowbugs list
>> To unsubscribe from this group, send email to
>> tetrode+unsubscribe at googlegroups.com<mailto:tetrode+unsubscribe at googlegroups.com>
>> <javascript:_e(%7B%7D,'cvml','tetrode%2Bunsubscribe at googlegroups.com<mailto:tetrode%2Bunsubscribe at googlegroups.com>');>
>> For more options, visit this group at
>> http://groups.google.com/group/tetrode?hl=en
>> NNNN
>>
>> ---
>> You received this message because you are subscribed to the Google Groups
>> "Glowbugs" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to tetrode+unsubscribe at googlegroups.com<mailto:tetrode+unsubscribe at googlegroups.com>
>> <javascript:_e(%7B%7D,'cvml','tetrode%2Bunsubscribe at googlegroups.com<mailto:tetrode%2Bunsubscribe at googlegroups.com>');>.
>> For more options, visit https://groups.google.com/d/optout.
>>
> ______________________________________________________________
> Boatanchors mailing list
> Home: http://mailman.qth.net/mailman/listinfo/boatanchors
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Boatanchors at mailman.qth.net<mailto:Boatanchors at mailman.qth.net>
>
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com<http://usol.com> **
>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Boatanchors mailing list
Home: http://mailman.qth.net/mailman/listinfo/boatanchors
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Boatanchors at mailman.qth.net<mailto:Boatanchors at mailman.qth.net>

List Administrator: Duane Fischer, W8DBF
** For Assistance: dfischer at usol.com<http://usol.com> **

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

--
--
ZCZC
This is a transmission from the Glowbugs list
To unsubscribe from this group, send email to
tetrode+unsubscribe at googlegroups.com
For more options, visit this group at
http://groups.google.com/group/tetrode?hl=en
NNNN

---
You received this message because you are subscribed to the Google Groups "Glowbugs" group.
To unsubscribe from this group and stop receiving emails from it, send an email to tetrode+unsubscribe at googlegroups.com<mailto:tetrode+unsubscribe at googlegroups.com>.
For more options, visit https://groups.google.com/d/optout.