[Boatanchors] removing Hallicrafters SX28 from cabinet

[W7FE]

Have you removed the bottom cover plate from the cabinet?

73 de Stu, W7FE
Henderson, NV

John King via Boatanchors <boatanchors at mailman.qth.net> wrote:

>I have removed all 8 screws holding the front panel of my SX28 and two small screws in the chassis at the rear of the receiver.
>
>I have tried to pull the SX28 out of the cabinet, but the chassis only moves about i/8 inch. I have placed the rcvr face down and tried to lift the cabinet off the chassis to no avail. I have tried to remove the cabinet with the receiver on its' end and face down. I am missing something because I can't get the cabinet off the receiver.  Anyone have an SX28 and know how to remove the cabinet> Thanks and 73, John, K5PGW 
>______________________________________________________________
>Boatanchors mailing list
>Home: http://mailman.qth.net/mailman/listinfo/boatanchors
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Boatanchors at mailman.qth.net
>
>List Administrator: Duane Fischer, W8DBF
>** For Assistance: dfischer at usol.com **
>
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html