[Boatanchors] removing Hallicrafters SX28 from cabinet

[Joe Connor via Boatanchors]

Also, make sure you remove the 5Z3. It's easy to hit that on the front of the cabinet on the way out.

Joe Connor


On Wednesday, June 4, 2014 2:48 PM, W7FE <w7fe at cox.net> wrote:
 

>
>
>Have you removed the bottom cover plate from the cabinet?
>
>73 de Stu, W7FE
>Henderson, NV
>
>John King via Boatanchors <boatanchors at mailman.qth.net> wrote:
>
>>I have removed all 8 screws holding the front panel of my SX28 and two small screws in the chassis at the rear of the receiver.
>>
>>I have tried to pull the SX28 out of the cabinet, but the chassis only moves about i/8 inch. I have placed the rcvr face down and tried to lift the cabinet off the chassis to no avail. I have tried to remove the cabinet with the receiver on its' end and face down. I am missing something because I can't get the cabinet off the receiver.  Anyone have an SX28 and know how to remove the cabinet> Thanks and 73, John, K5PGW 
>>______________________________________________________________
>>Boatanchors mailing list
>>Home: http://mailman.qth.net/mailman/listinfo/boatanchors
>>Help: http://mailman.qth.net/mmfaq.htm
>>Post: mailto:Boatanchors at mailman.qth.net
>>
>>List Administrator: Duane Fischer, W8DBF
>>** For Assistance: dfischer at usol.com **
>>
>>
>>This list hosted by: http://www.qsl.net
>>Please help support this email list: http://www.qsl.net/donate.html
>______________________________________________________________
>Boatanchors mailing list
>Home: http://mailman.qth.net/mailman/listinfo/boatanchors
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Boatanchors at mailman.qth.net
>
>List Administrator: Duane Fischer, W8DBF
>** For Assistance: dfischer at usol.com **
>
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>
>
>