[Boatanchors] Boatanchor Schematic Drawing Software

[David C. Hallam]

John,

You might be right.  I haven't used AutoCad for about 10 years since I 
retired from my work as a project manger.  I was using it for factory 
layouts and machinery installation drawings.  I don't even remember what 
was in the electronics symbol library.  I have removed the program from 
my computer and would have to reinstall which would also require that I 
get some kind of an external floppy drive.

I am/was considering purchasing an updated version of Visio Technical.  
Mine is an older one, 4.0.

David

On 11/30/2011 12:01 PM, J. Forster wrote:
> I'd use, and do use, AutoCAD. I've tried some others, but have run into
> things you just cannot do. An example that caused me lots of grief was the
> inability to TRIM the intersection of two lines.
>
> Yes, AutoCAD is complex, but you can ignore many of the bells and
> whistles. You only really need the "Draw" and "Edit" menus.
>
> Also, the ability to draw PLINEs is very handy.  IMO, it can't be beat for
> really pretty drawings.
>
> I can send you a sample .pdf off-list if you want.
>
> -John
>
> =============
>
>
>> I am looking for suggestions on the "best" drawing software for vacuum
>> tube schematics.  I have Visio, AutoCad, and AutoCad LT.  AutoCad is
>> difficult to use unless you are an experienced user.  Visio sees to have
>> a number of electronics symbols and is easier for the inexperienced.  I
>> haven't looked at AutoCad LT yet.
>>
>> What other types of software might there be that can be learned without
>> hours and hours of effort?
>>
>> David
>> KW4DH
>>
>> --
>>
>> "We may consider each generation as a distinct nation, with a right, by
>> the will of its majority, to bind themselves, but none to bind the
>> succeeding generation, more than the inhabitants of another country."
>> Thomas Jefferson
>>
>>
>>
>> ______________________________________________________________
>> Boatanchors mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/boatanchors
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Boatanchors at mailman.qth.net
>>
>> List Administrator: Duane Fischer, W8DBF
>> ** For Assistance: dfischer at usol.com **
>>
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>>
>
> ______________________________________________________________
> Boatanchors mailing list
> Home: http://mailman.qth.net/mailman/listinfo/boatanchors
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Boatanchors at mailman.qth.net
>
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

-- 
"I predict future happiness for Americans if they can prevent the government from wasting the labors of the people under the pretense of taking care of them."
Thomas Jefferson


"We may consider each generation as a distinct nation, with a right, by the will of its majority, to bind themselves, but none to bind the succeeding generation, more than the inhabitants of another country."
Thomas Jefferson