[Boatanchors] Capacitance meter / tester

[Pete Lancashire]

Forgot after a Sprague TO-6, a Eico 950B.

On Wed, Dec 7, 2011 at 3:14 PM, Pete Lancashire <pete at petelancashire.com> wrote:
> what types ?
>
> electrolytics - Sencore LC102 or same family if you have the $'s, if
> not a ZM11 or Sprague TO-6(A)
>
> ZM11 http://www.prc68.com/I/ZM11.shtml
>
> small caps - My other boat anchor hobby is Test & Measurement equip
> from the 40's to the 70's
> but I spend too much on that hobby. You should have a high frequency
> bridge, 1 MHz or better
> 10 MHz but your talking $'s ..For just rough 'ok' checks .. there are
> a lot out there. For higher
> freq caps I use a HP 4275A
>
> On Wed, Dec 7, 2011 at 2:48 PM, Rick Poole <wa1rkt at arrl.net> wrote:
>>
>> What's the current consensus for a really good capacitance tester /
>> meter, for testing capacitors in these old boat anchors?
>>
>> Thanks...
>>
>> Rick WA1RKT
>>
>> ______________________________________________________________
>> Boatanchors mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/boatanchors
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Boatanchors at mailman.qth.net
>>
>> List Administrator: Duane Fischer, W8DBF
>> ** For Assistance: dfischer at usol.com **
>>
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html