[Boatanchors] Capacitance meter / tester

[Pete Lancashire]

what types ?

electrolytics - Sencore LC102 or same family if you have the $'s, if
not a ZM11 or Sprague TO-6(A)

ZM11 http://www.prc68.com/I/ZM11.shtml

small caps - My other boat anchor hobby is Test & Measurement equip
from the 40's to the 70's
but I spend too much on that hobby. You should have a high frequency
bridge, 1 MHz or better
10 MHz but your talking $'s ..For just rough 'ok' checks .. there are
a lot out there. For higher
freq caps I use a HP 4275A

On Wed, Dec 7, 2011 at 2:48 PM, Rick Poole <wa1rkt at arrl.net> wrote:
>
> What's the current consensus for a really good capacitance tester /
> meter, for testing capacitors in these old boat anchors?
>
> Thanks...
>
> Rick WA1RKT
>
> ______________________________________________________________
> Boatanchors mailing list
> Home: http://mailman.qth.net/mailman/listinfo/boatanchors
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Boatanchors at mailman.qth.net
>
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html