[ARC5] WTB Roller inductor assy and antenna relay for T-22

[spr at earthlink.net]

To help confirm it's the right part before shipment, take a good picture with a ruler next to the coil. This should help the buyer confirm it's the right one.

/Scott

-----Original Message-----
>From: Mike Morrow <kk5f at earthlink.net>
>Sent: Apr 14, 2020 8:34 AM
>To: arc5 at mailman.qth.net
>Subject: Re: [ARC5] WTB Roller inductor assy and antenna relay for T-22
>
>> There should be a part number! I might have one but need the number
>>
>> Ron K3PID
>
>In 2016 I posted to this list a file with "command set" coil and capacitor information, including part numbers;
>
>  http://mailman.qth.net/pipermail/arc5/attachments/20160425/24b17647/attachment-0001.pdf
>
>That file shows the desired antenna loading coil L-52 for the T-22/ARC-5 to be part 6035.  The same part 6035 is also used in the T-21/ARC-5, BC-458-A, BC-459-A, CBY/CCT-52210, and CBY/CCT-52211.
>
>Mike / KK5F
>
>----- Original Message -----
>From: J Mcvey via ARC5 <arc5 at mailman.qth.net>
>Reply-To: J Mcvey <ac2eu at yahoo.com>
>Sent: 4/13/2020 8:34:26 PM
>
>I just acquired this T-22 that I want to put into service, but the entire roller assembly was removed as well as the antenna post, rest post and relay,
> Fortunately, it's just disassembled, not hacked or drilled in any other way.
>Counting from where the wires go though the holes, the roller is about 25 turns.
>
>If anybody has any of these you can part with, please contact me off list .
>Thanks,
>Jim
>______________________________________________________________
>ARC5 mailing list
>Home: http://mailman.qth.net/mailman/listinfo/arc5
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:ARC5 at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: https://www.qsl.net/donate.html