[ARC5] WTB Roller inductor assy and antenna relay for T-22

[Mike Morrow]

That would only be helpful accompanied by roller wire gauge and number of turns, PLUS the recipien5 having the original part for comparison...which the OP does not.  If the number on a prospective roller is 6035, it will be marked in semi-permanent paint and that is the only authentication necessary.

Mike / KK5F

-----Original Message-----
>From: spr at earthlink.net
>Sent: Apr 14, 2020 11:02 AM
>To: Mike Morrow <kk5f at arrl.net>, arc5 at mailman.qth.net
>Subject: Re: [ARC5] WTB Roller inductor assy and antenna relay for T-22
>
>
>To help confirm it's the right part before shipment, take a good picture with a ruler next to the coil. This should help the buyer confirm it's the right one.
>
>/Scott
>
>-----Original Message-----
>>From: Mike Morrow <kk5f at earthlink.net>
>>Sent: Apr 14, 2020 8:34 AM
>>To: arc5 at mailman.qth.net
>>Subject: Re: [ARC5] WTB Roller inductor assy and antenna relay for T-22
>>
>>> There should be a part number! I might have one but need the number
>>>
>>> Ron K3PID
>>
>>In 2016 I posted to this list a file with "command set" coil and capacitor information, including part numbers;
>>
>>  
 http://mailman.qth.net/pipermail/arc5/attachments/20160425/24b17647/attachment-0001.pdf
>>
>>That file shows the desired antenna loading coil L-52 for the T-22/ARC-5 to be part 6035.  The same part 6035 is also used in the T-21/ARC-5, BC-458-A, BC-459-A, CBY/CCT-52210, and CBY/CCT-52211.
>>
>>Mike / KK5F
>>
>>----- Original Message -----
>>From: J Mcvey via ARC5 <arc5 at mailman.qth.net>
>>Reply-To: J Mcvey <ac2eu at yahoo.com>
>>Sent: 4/13/2020 8:34:26 PM
>>
>>I just acquired this T-22 that I want to put into service, but the entire roller assembly was removed as well as the antenna post, rest post and relay,
>> Fortunately, it's just disassembled, not hacked or drilled in any other way.
>>Counting from where the wires go though the holes, the roller is about 25 turns.
>>
>>If anybody has any of these you can part with, please contact me off list .
>>Thanks,
>>Jim
>>______________________________________________________________
>