[ARC5] WTB Roller inductor assy and antenna relay for T-22

[Mike Morrow]

> There should be a part number! I might have one but need the number
>
> Ron K3PID

In 2016 I posted to this list a file with "command set" coil and capacitor information, including part numbers;

  http://mailman.qth.net/pipermail/arc5/attachments/20160425/24b17647/attachment-0001.pdf

That file shows the desired antenna loading coil L-52 for the T-22/ARC-5 to be part 6035.  The same part 6035 is also used in the T-21/ARC-5, BC-458-A, BC-459-A, CBY/CCT-52210, and CBY/CCT-52211.

Mike / KK5F

----- Original Message -----
From: J Mcvey via ARC5 <arc5 at mailman.qth.net>
Reply-To: J Mcvey <ac2eu at yahoo.com>
Sent: 4/13/2020 8:34:26 PM

I just acquired this T-22 that I want to put into service, but the entire roller assembly was removed as well as the antenna post, rest post and relay,
 Fortunately, it's just disassembled, not hacked or drilled in any other way.
Counting from where the wires go though the holes, the roller is about 25 turns.

If anybody has any of these you can part with, please contact me off list .
Thanks,
Jim