[ARC5] BC-453 Current Draw

[DSP3]

K3HVG uses B+ of 175v at 39ma. (+/- 5 ma.)  on three receivers.


On 1/20/2015 6:40 PM, Phillip Carpenter wrote:
> To All Command Set Owners:
>
> Could all of you that can and have actual data please post the B+ voltage you use and current drawn for your BC-453 receiver (or other Command Set receiver, BC-454, BC-455, BC-946)?
>
> I am trying to draw a B+ volts to current draw curve. It would be nice if all could state the current draw at full AF and at 1/2 AF volume, if possible so I can have an idea what the normal and max operating current draws are for the receiver.
>
> This is a learning experiment and I thanks those who can participate for your help!
>
> Ideally the curve would go from 24v to about 250v. We'll all be able to see how the current draw follows the B+ voltage used.
>
> Many thanks!
>
> Phillip
>
> Sent from my iPhone
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>