[ARC5] R23 repair, dynamotor mounts, questions...

[AKLDGUY .]

It may be 'isolated' because the threads are stripped, or because a
screw broke off leaving part of itself inside. If so, shouldn't be too
hard to obtain another capacitor.

73 de Neil ZL1ANM

On 12/23/15, aa9il at sbcglobal.net <aa9il at sbcglobal.net> wrote:
> Hello
> Im working on an R23 receiver that was modified but never finished.
> "Someone" removedthe dynamotor mounts and the small metal stud that is near
> the 3 pin plug - the plugis still there.
> does anyone have 4 of the dynamotor mounts?
> Once I clean the tube, coil pins, sockets, tweak the trimmers, deoxit, etc,
> I will go over thewiring mods - it looks like this was a 12v change so I
> will check the wiring adds.
> There were two bathtub caps removed I'll put in new mylar caps.
> One thing I saw was the 15uF capacitor is mounted on a small insulation
> mount - so itsnot bolted to the chassis.
> There is a ground wire soldered to the flower pot with a solder type lug.
> Also interesting is thatthe 15uF cap is rated at 35v
> So, a work in progress - has anyone else encountered the 'isolated' 15uF
> cap?
> 73Mike  AA9IL
>
>
>