[ARC5] R23 repair, dynamotor mounts, questions...

[aa9il at sbcglobal.net]

Hello 
Im working on an R23 receiver that was modified but never finished.  "Someone" removedthe dynamotor mounts and the small metal stud that is near the 3 pin plug - the plugis still there.
does anyone have 4 of the dynamotor mounts?
Once I clean the tube, coil pins, sockets, tweak the trimmers, deoxit, etc, I will go over thewiring mods - it looks like this was a 12v change so I will check the wiring adds.
There were two bathtub caps removed I'll put in new mylar caps.
One thing I saw was the 15uF capacitor is mounted on a small insulation mount - so itsnot bolted to the chassis.
There is a ground wire soldered to the flower pot with a solder type lug.  Also interesting is thatthe 15uF cap is rated at 35v
So, a work in progress - has anyone else encountered the 'isolated' 15uF cap?
73Mike  AA9IL


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20151223/3f916333/attachment.html>