[ARC5] CBY-52232 On 160 meters

[Ken]

Hey Brian;
     Thanks, No, stay away from the ceiling until it cools down.  It 
pretty cold here in Texas, I won't be heading into my attic (ceiling) 
for a few months.

Ken WA0SBU


On 02/03/2011 05:44 AM, Brian Clarke wrote:
> Hello Ken and Henry,
> I may well have a couple of roller inductors - but not for the 2.1 to 3 mcs
> Tx. Unfortunately, with daytime temperatures around 40 C, ie, over 100 F
> outside, and my inventory stored in the ceiling, it will be a rainy day
> before I go looking ... if you can wait.
> 73 de Brian, VK2GCE.
>
> ----- Original Message -----
> From: "Henry Mei'l's"<meils at get2net.dk>
> To:<arc5 at mailman.qth.net>
> Sent: Thursday, February 03, 2011 7:02 AM
> Subject: Re: [ARC5] CBY-52232 On 160 meters
>
>
>> Also have a Command set  rotary inductor with broken wire - was thinking
>> of
>> trying to solder it at the broken point and
>> accept the bump -- skeptical about the solder joint holding.
>>
>> Henry
>>
>> ----- Original Message -----
>> From: "mac"<w7qho at aol.com>
>> To:<ken at wa0sbu.com>
>> Cc: "ARC-5 QTH"<ARC5 at mailman.qth.net>
>> Sent: Wednesday, February 02, 2011 7:17 PM
>> Subject: Re: [ARC5] CBY-52232 On 160 meters
>>
>>
>>> Ken,
>>>
>>> Unless you're a stickler for authenticity just substitute the roller
>>> coil assembly from one of the other 274N/ARC-5 transmitters.  Won't
>>> have as many turns but will still work OK unless you plan to use it
>>> with a VERY short whip antenna.
>>>
>>> Dennis D. W7QHO
>>> Glendale, CA
>>>
>>> ****************
>>> On Feb 2, 2011, at 6:06 AM, Ken wrote:
>>>
>>>>>>     Thanks for the info, its in great condition, the only problem is
>>>>>> the wire on the Ant Inductance form is broken.
>
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>