[ARC5] CBY-52232 On 160 meters

[Brian Clarke]

Hello Ken and Henry,
I may well have a couple of roller inductors - but not for the 2.1 to 3 mcs 
Tx. Unfortunately, with daytime temperatures around 40 C, ie, over 100 F 
outside, and my inventory stored in the ceiling, it will be a rainy day 
before I go looking ... if you can wait.
73 de Brian, VK2GCE.

----- Original Message ----- 
From: "Henry Mei'l's" <meils at get2net.dk>
To: <arc5 at mailman.qth.net>
Sent: Thursday, February 03, 2011 7:02 AM
Subject: Re: [ARC5] CBY-52232 On 160 meters


> Also have a Command set  rotary inductor with broken wire - was thinking 
> of
> trying to solder it at the broken point and
> accept the bump -- skeptical about the solder joint holding.
>
> Henry
>
> ----- Original Message ----- 
> From: "mac" <w7qho at aol.com>
> To: <ken at wa0sbu.com>
> Cc: "ARC-5 QTH" <ARC5 at mailman.qth.net>
> Sent: Wednesday, February 02, 2011 7:17 PM
> Subject: Re: [ARC5] CBY-52232 On 160 meters
>
>
>> Ken,
>>
>> Unless you're a stickler for authenticity just substitute the roller
>> coil assembly from one of the other 274N/ARC-5 transmitters.  Won't
>> have as many turns but will still work OK unless you plan to use it
>> with a VERY short whip antenna.
>>
>> Dennis D. W7QHO
>> Glendale, CA
>>
>> ****************
>> On Feb 2, 2011, at 6:06 AM, Ken wrote:
>>
>>>>>    Thanks for the info, its in great condition, the only problem is
>>>>> the wire on the Ant Inductance form is broken.