[1000mp] problem

[Tom]

Tnx for info Douglas,
         Do you happen to have a # for it?
                 Tom
----- Original Message ----- 
From: <KB9GKC at aol.com>
To: <1000mp at mailman.qth.net>
Sent: Monday, February 18, 2013 5:38 PM
Subject: Re: [1000mp] problem


> Hello Tom,
>
> Replace the T/R relay, it's available at RF parts!
>
> The board that has the T/R relay is underneath the PA on the left side of
> the radio looking down from the top.  You should resolder all the RFplug 
> in
> jacks that go to that board, I have seen and heard of a number of cold
> solder joints on the RF plugs.
>
> 73
>
> Douglas
>
>
> In a message dated 2/18/2013 2:57:22 P.M. Central Standard Time,
> tgaum2 at ns.sympatico.ca writes:
>
> still  have 30L1;i saved it for you
> ----- Original Message ----- 
> From: "Rick  Moskovits" <rick.moskovits at ns.sympatico.ca>
> To: "All about Yaesu  1000mp" <1000mp at mailman.qth.net>
> Sent: Monday, February 18, 2013 2:26  PM
> Subject: Re: [1000mp] problem
>
>
>> Hi Tom-hope you've been  well-afraid I cant help with the receive but can
>> answer the vrf  question -it does not work above 20 meters-this is normal
>> because it  is a pre filter for strong low band signals especially 80 and
>>  40
>> meter stuff-one of the little gems that isnt in manuel.I had a  great 
>> chat
>> with a tech at yaesu back in 2004 when I bought mine and he  explained
> this
>> among other things-he also said that while the company  doesn't advertise
>> it-the 1000mp field is closer to the ft1000D on  receive than the 200
> watt
>> mk
>> 5 is  -and the ft 1000D"s  receiver is ledgendary!!-hope to meet you one
> of
>> these days-did you  ever sell that 30L1?-VY 73 Rick ve1rnm
>> -----Original  Message-----
>> From: 1000mp-bounces at mailman.qth.net
>>  [mailto:1000mp-bounces at mailman.qth.net]On Behalf Of Tom
>> Sent:  Saturday, February 16, 2013 11:08 PM
>> To:  1000mp at mailman.qth.net
>> Subject: [1000mp]  problem
>>
>>
>> I have an FT1000MP mark5 field that has a  problem with weak or no 
>> receive
>> when first turned on.
>>   When mic is tapped to activate vox, it goes to normal.PTT,rotating ATT
> or
>> togglingVRF does not work
>>    Another vproblem  just noticed is that the VRF won,t work above 20M
>>      I,m thinking it is one or more relays in front-end.
>>     I,m hoping the LIST can help.
>>           Tom, VE!BMJ
>>  ______________________________________________________________
>> 1000mp  mailing list
>> Home:  http://mailman.qth.net/mailman/listinfo/1000mp
>> Help:  http://mailman.qth.net/mmfaq.htm
>> Post:  mailto:1000mp at mailman.qth.net
>>
>> This list hosted by:  http://www.qsl.net
>> Please help support this email list:  http://www.qsl.net/donate.html
>>
>>  ______________________________________________________________
>> 1000mp  mailing list
>> Home:  http://mailman.qth.net/mailman/listinfo/1000mp
>> Help:  http://mailman.qth.net/mmfaq.htm
>> Post:  mailto:1000mp at mailman.qth.net
>>
>> This list hosted by:  http://www.qsl.net
>> Please help support this email list:  http://www.qsl.net/donate.html
>
> ______________________________________________________________
> 1000mp  mailing list
> Home: http://mailman.qth.net/mailman/listinfo/1000mp
> Help:  http://mailman.qth.net/mmfaq.htm
> Post:  mailto:1000mp at mailman.qth.net
>
> This list hosted by:  http://www.qsl.net
> Please help support this email list:  http://www.qsl.net/donate.html
>
> ______________________________________________________________
> 1000mp mailing list
> Home: http://mailman.qth.net/mailman/listinfo/1000mp
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:1000mp at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html