[1000mp] AW: Pulse + MONI?

[Brian Smithson]

Well, it WAS power!

8 years ago we put an addition on our house and my shack was part of that
addition. I had it wired for 100A service and never had a problem. The last
8 months we've been remodelling again and the room that used to be my shack
has become the master bath. I moved into a room next door on the original
house wiring. Not sure what is different, but when I ran a cord to a plug in
the addition the pulsing stopped. Viola!

A quick unrelated question - I have the 200W version of the MkV with the
power supply. If the PS were unplugged for a while, would the radio 'forget'
anything? Is unplugging the PS any different than turning the PS off to the
radio? That is, does the PS supply anything to the radio even when it is
off?

Thanks for all the great suggestions!

73,

-Brian n8wrl

-----Original Message-----
From: 1000mp-bounces at mailman.qth.net [mailto:1000mp-bounces at mailman.qth.net]
On Behalf Of cherokeehillfarm at earthlink.net
Sent: Wednesday, January 24, 2007 9:23 AM
To: All about Yaesu 1000mp
Subject: Re: [1000mp] AW: Pulse + MONI?

2 Icom 756 Pro Radios to be given away to QSL/QTH .NET supporters!  One on
Dec 31 and one on Jan 31.
See http://mailman.qth.net for details.
______________________________________________________________

Don't forget to check the 110V AC circuit also.  The breaker may be making
poor contact, or, one of the connections on the branch circuit may be bad.
While you have checked other outlets in the room, they may be on the same
branch.

If the lights don't blink while transmitting into a dummy load with full
output, then RF may be getting into the power line somehow.

73,

Mike
W2AJI

-----Original Message-----
>From: Uwe Fleischer <uwe.fleischer at asco-online.com>
>Sent: Jan 24, 2007 2:58 AM
>To: 1000mp at mailman.qth.net
>Subject: [1000mp] AW: Pulse + MONI?
>
>2 Icom 756 Pro Radios to be given away to QSL/QTH .NET supporters!  One on
Dec 31 and one on Jan 31.
>See http://mailman.qth.net for details.
>______________________________________________________________
>
>Hi Brian,
>
>> 1. The LED's on the front panel and the lights in my room pulse 
>> slightly with the CW I'm sending. I've tried moving the light to 
>> different plugs in
>
>> 2. If I listen to the MONI when I xmit CW it sounds really bad - 
>> almost like
>
>to me it sounds like you have RF coupled into your power supply 
>installation.
>What antennas are you using on which band? Can you see the effects you 
>talk about on every band? With exactly the same strength? Could you 
>switch between different antennas on the same band and watch if something
changes?
>
>
>73 de Uwe, DL8UF
>
>
>______________________________________________________________
>1000mp mailing list
>Home: http://mailman.qth.net/mailman/listinfo/1000mp
>Help: http://mailman.qth.net/mmfaq.html
>Post: mailto:1000mp at mailman.qth.net

______________________________________________________________
1000mp mailing list
Home: http://mailman.qth.net/mailman/listinfo/1000mp
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:1000mp at mailman.qth.net