[1000mp] AW: Pulse + MONI?

[cherokeehillfarm at earthlink.net]

Don't forget to check the 110V AC circuit also.  The breaker may be making poor contact, or, one of the connections on the branch circuit may be bad.  While you have checked other outlets in the room, they may be on the same branch.

If the lights don't blink while transmitting into a dummy load with full output, then RF may be getting into the power line somehow.

73,

Mike
W2AJI

-----Original Message-----
>From: Uwe Fleischer <uwe.fleischer at asco-online.com>
>Sent: Jan 24, 2007 2:58 AM
>To: 1000mp at mailman.qth.net
>Subject: [1000mp] AW: Pulse + MONI?
>
>2 Icom 756 Pro Radios to be given away to QSL/QTH .NET supporters!  One on Dec 31 and one on Jan 31.
>See http://mailman.qth.net for details.
>______________________________________________________________
>
>Hi Brian,
>
>> 1. The LED's on the front panel and the lights in my room pulse slightly
>> with the CW I'm sending. I've tried moving the light to different plugs in
>
>> 2. If I listen to the MONI when I xmit CW it sounds really bad - almost
>> like
>
>to me it sounds like you have RF coupled into your power supply
>installation.
>What antennas are you using on which band? Can you see the effects you talk
>about on every band? With exactly the same strength? Could you switch
>between different antennas on the same band and watch if something changes?
>
>
>73 de Uwe, DL8UF
>
>
>______________________________________________________________
>1000mp mailing list
>Home: http://mailman.qth.net/mailman/listinfo/1000mp
>Help: http://mailman.qth.net/mmfaq.html
>Post: mailto:1000mp at mailman.qth.net