[1000mp] Noise on recording

[Piotr Gutkiewicz]

Hello Csaba.

Try to press DUAL button on the front panel to switch off the subreceiver.

73! Peter, SP5CFD

----- Original Message ----- 
From: "Garry Shapiro" <garry at ni6t.com>
To: "All about Yaesu 1000mp" <1000mp at mailman.qth.net>
Sent: Sunday, April 30, 2006 00:51
Subject: RE: [1000mp] Noise on recording


> I wonder if the AF-OUT jack may be loose or otherwise not making a
reliable
> ground contact. I have a current condition on my MP where the RX-ANT IN
jack
> has a flaky ground and needs some mechanical attention.
>
> Garry, NI6T
>
> -----Original Message-----
> From: 1000mp-bounces at mailman.qth.net
> [mailto:1000mp-bounces at mailman.qth.net]On Behalf Of Kevin der Kinderen
> Sent: Saturday, April 29, 2006 9:06 AM
> To: 'All about Yaesu 1000mp'
> Subject: RE: [1000mp] Noise on recording
>
>
> Hi Csaba:
>
> I think the noise is coming from the MkV Field, not the computer.
>
> I was using the AF Out jack to my computer line-in and copying Hell mode
> with MixW. There was more noise on the Hell print than could be accounted
> for by the receiver noise. After the QSO, I backed the RF gain down all
the
> way down. There was not-so-random noise on the Hell strips.
>
> I unplugged the cable from the AF-OUT jack and the noise went away.
>
> Next I took audio from the PSK jack to computer line-in, no noise with RF
> Gain all the way down.
>
> I'm not sure if this noise on the AF-OUT jack is common to all MkV's or
just
> a few, but it looks like you may have the same issue as me. I'd be
> interested in results others may have.
>
> 73,
> Kev - K4VD
>
>
> -----Original Message-----
> From: 1000mp-bounces at mailman.qth.net
[mailto:1000mp-bounces at mailman.qth.net]
> On Behalf Of HA3LN Csaba NAGY
> Sent: Saturday, April 29, 2006 3:10 AM
> To: 1000mp at mailman.qth.net
> Subject: [1000mp] Noise on recording
>
> Hi All,
>
> I prepared a shielded interface cable with two 3.5mm stereo
> male jack. (connected to MkV Field AF out and the laptop
> mic-in).
> I recorded a couple of clips but I found it noisy. The cable
> was resoldered twice so it seems the cable is correct.
>
> Does anyone experience the same?
>
>
> Thanks in advance,
>
> Csaba  HA3LN / VK4ADF
>
>
>
>
>
____________________________________________________________________________
> ___
> Nyerj egy lakást! - Az [origo] ingatlan játékán, egy új lakást nyerhetsz a
> Szent László Házban.
> Költözz még idén új lakásba!
> http://www.origo.hu/adsminisites/ingatlan/jatek/index.html
>
>
> ______________________________________________________________
> 1000mp mailing list
> Home: http://mailman.qth.net/mailman/listinfo/1000mp
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:1000mp at mailman.qth.net
>
> ______________________________________________________________
> 1000mp mailing list
> Home: http://mailman.qth.net/mailman/listinfo/1000mp
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:1000mp at mailman.qth.net
>
> ______________________________________________________________
> 1000mp mailing list
> Home: http://mailman.qth.net/mailman/listinfo/1000mp
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:1000mp at mailman.qth.net
>