[1000mp] Roofing Filter

[Pete Smith]

Contact Inrad.

73, Pete

At 03:24 PM 3/18/2005, Bob Main wrote:

>Well I put in the roofing filter, NB mod and a 250 Hz filter.  I put it 
>all back together, plugged my Elecraft XG-1 to it and turned it and the 
>radio on.  Last week when I got the XG-1 the 50 uv signal gave me exactly 
>S9.  With the roofing filter in I got S5.  My 9-1 reading was 13 and so I 
>started increasing it.  After about 19 the reading stopped climbing and 
>never went above S7.  Any ideas?
>
>I've checked to make sure the two wires that I had to solder in were not 
>shorted to chassis ground or together.  I unplugged the coax going to 
>J2003 and plugged it into J1 of the roofing filter.  Then I took the 
>supplied coax and went from J2 of the roofing filter board back to 
>J2003.  So all that is right.
>
>Got any suggestions?
>
>Bob
>KB4CL
>______________________________________________________________
>1000mp mailing list
>Home: http://mailman.qth.net/mailman/listinfo/1000mp
>Help: http://mailman.qth.net/mmfaq.html
>Post: mailto:1000mp at mailman.qth.net