[1000mp] Roofing Filter

[Bob Main]

Did, but George had left the building.  Got it working now.  Must have been 
one of those coax cables.

Bob
KB4CL

----- Original Message ----- 
From: "Pete Smith" <n4zr at contesting.com>
To: "All about Yaesu 1000mp" <1000mp at mailman.qth.net>; "MarkV" 
<1000mp at mailman.qth.net>
Sent: Friday, March 18, 2005 4:05 PM
Subject: Re: [1000mp] Roofing Filter


> Contact Inrad.
>
> 73, Pete
>
> At 03:24 PM 3/18/2005, Bob Main wrote:
>
>>Well I put in the roofing filter, NB mod and a 250 Hz filter.  I put it 
>>all back together, plugged my Elecraft XG-1 to it and turned it and the 
>>radio on.  Last week when I got the XG-1 the 50 uv signal gave me exactly 
>>S9.  With the roofing filter in I got S5.  My 9-1 reading was 13 and so I 
>>started increasing it.  After about 19 the reading stopped climbing and 
>>never went above S7.  Any ideas?
>>
>>I've checked to make sure the two wires that I had to solder in were not 
>>shorted to chassis ground or together.  I unplugged the coax going to 
>>J2003 and plugged it into J1 of the roofing filter.  Then I took the 
>>supplied coax and went from J2 of the roofing filter board back to J2003. 
>>So all that is right.
>>
>>Got any suggestions?
>>
>>Bob
>>KB4CL
>>______________________________________________________________
>>1000mp mailing list
>>Home: http://mailman.qth.net/mailman/listinfo/1000mp
>>Help: http://mailman.qth.net/mmfaq.html
>>Post: mailto:1000mp at mailman.qth.net
>
> ______________________________________________________________
> 1000mp mailing list
> Home: http://mailman.qth.net/mailman/listinfo/1000mp
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:1000mp at mailman.qth.net
>