[1000mp] Is QSK with the MP or the MarkV possible?

[Blake Meinecke]

Turning the internal amp relay off is essential also

73,
Blake N4GI


----- Original Message ----- 
From: "Gary Ferdinand W2CS" <w2cs at bellsouth.net>
To: "All about Yaesu 1000mp" <1000mp at mailman.qth.net>
Sent: Wednesday, November 10, 2004 8:31 PM
Subject: RE: [1000mp] Is QSK with the MP or the MarkV possible?


> Welcome to the so-called QSK of the MP.  If you find a solution, I'm all
> ears.  What you describe is what I hear, too.  It doesn't come even close 
> to
> the Kenwood TS930/40/50 series QSK.
>
> Gary W2CS
>
>
>
>> -----Original Message-----
>> From: 1000mp-bounces at mailman.qth.net
>> [mailto:1000mp-bounces at mailman.qth.net]On Behalf Of Tod - ID
>> Sent: Wednesday, November 10, 2004 6:38 PM
>> To: 'All about Yaesu 1000mp'
>> Subject: RE: [1000mp] Is QSK with the MP or the MarkV possible?
>>
>>
>> What 7-4 and 7-5 settings will do the job?
>>
>> I find that there is 'distracting' thumping when the RX comes
>> back on line.
>> The thump does not occur on the make.
>>
>> I sort of thought that the problem was the time difference in millisecond
>> between the  drop of the RF output and the turn on of the RX. On the 
>> other
>> hand it may be that the gain rise time is too fast. Maybe the AGC has too
>> fast a rise time.
>>
>> Has anyone done any research on this? Am I the only one noticing
>> this? If so
>> I would like to know the settings other folks are using to be
>> sure if is not
>> a menu selection problem on my part.
>>
>> The thump is not dependent on running high power -- in fact, with only 5
>> watts output (or less) the thumps is still there which leads me to 
>> believe
>> it is an AGC matter.
>>
>> Tod, KØTO
>>
>>
>>
>>
>>
>>
>> >-----Original Message-----
>> >From: 1000mp-bounces at mailman.qth.net
>> >[mailto:1000mp-bounces at mailman.qth.net] On Behalf Of GRAEME JACKSON
>> >Sent: Wednesday, November 10, 2004 10:55 AM
>> >To: All about Yaesu 1000mp
>> >Subject: Re: [1000mp] Is QSK with Mark Field possible ?
>> >
>> >You should not have any problems.
>> >Is your vox button pressed in by mistake ?
>> >Are menu selections 7-4 and 7-5 set correctly ?
>> >
>> >Graeme......G4CKH.
>> >----- Original Message -----
>> >From: "F8DQL" <f8dql at radioamateur.org>
>> >To: <1000mp at mailman.qth.net>
>> >Sent: Wednesday, November 10, 2004 3:45 PM
>> >Subject: [1000mp] Is QSK with Mark Field possible ?
>> >
>> >
>> >> Hello,
>> >> I recently bought a FT-1000MP Mark V Field and I am
>> >disapointed by the
>> >> AGC response time.
>> >> The receiver recovery time is too long, it is impossible to receive
>> >> between my signals when operating QSK at 20 wpm or more.
>> >> Is there a way to correct that ?
>> >> I noticed that the receiver recovery time was a bit better
>> >with the AGC
>> >> slow mode, but not really convincing.
>> >> Thanks for your help.
>> >>
>> >> _______________________________________________
>> >> 1000mp mailing list
>> >> 1000mp at mailman.qth.net
>> >> http://mailman.qth.net/mailman/listinfo/1000mp
>> >
>> >_______________________________________________
>> >1000mp mailing list
>> >1000mp at mailman.qth.net
>> >http://mailman.qth.net/mailman/listinfo/1000mp
>> >
>>
>> _______________________________________________
>> 1000mp mailing list
>> 1000mp at mailman.qth.net
>> http://mailman.qth.net/mailman/listinfo/1000mp
>
> _______________________________________________
> 1000mp mailing list
> 1000mp at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/1000mp
>