[1000mp] Connecting the Ameritron 811 amp to the 1000mp

[n3drk]

Lin switch to ON and I use the alc. The relay from the amp goes to TX Gnd
and the alc from amp goes to Ext Alc on radio. I use the 811 with my mark v.
73's
john-n3drk


----- Original Message ----- 
From: "Craig Spada" <caspada at adelphia.net>
To: <1000mp at mailman.qth.net>
Sent: Thursday, June 10, 2004 2:11 PM
Subject: [1000mp] Connecting the Ameritron 811 amp to the 1000mp


> Hi guys,
> I need some advice, I recently bought a used Ameritron 811 amp, I also
> purchased the Ameritron buffer interface ARB-704 with the plug and play
> cable for my 1000mp, my question is, the switch on the back of the 1000mp,
> the LIN switch should this be on or off?, I have read the op manual and
the
> service manual and I am confused on this switch setting, should it be on
or
> off, also should I connect the ALC line?, I have heard yes and no. Your
> advice and expertise would be appreciated.
> Thanks,
> Craig WA2TWF
> _______________________________________________
> 1000mp mailing list
> 1000mp at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/1000mp
>