[1000mp] 1000MP Dead Receiver

[Tom Homewood]

http://www.va3cr.net/settings%20and%20troubleshooting/vco%20problems%20and%20lost%20frequencies.html

It sounds like the VCO problem. See above. I have had it happen on two
ranges.

73, Tom, W1TO


----- Original Message ----- 
From: "Steve GW4BLE" <GW4BLE at btconnect.com>
To: <1000mp at mailman.qth.net>
Sent: Thursday, July 29, 2004 11:55 AM
Subject: [1000mp] 1000MP Dead Receiver


> One of the 1000MPs that I use (serial # 5L040237), has no receive between
> 6.5 and 12.0 MHz on the main receiver.
>
>
>
> The MAIN receiver is dead, but the sub-receiver can receive fine if I
first
> tune the main receiver to just below 6.5MHz, press A>B, and then tune
above
> 6.5MHz on sub VFO-B ; the ATT switch works on the sub-receiver so I
presume
> (?) its' not a front-end burn-out?
>
>
>
> My usual "radio repairman" will not be able to take this on for at least
six
> weeks, so I need some URGENT help here!
>
>
>
> 73
>
>
>
> Steve
>
> GW4BLE
>
>
>
> _______________________________________________
> 1000mp mailing list
> 1000mp at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/1000mp