[1000mp] 1000MP Dead Receiver

[E F Todd Benson]

Just had the identical problem, (mine was 7.5 to 14.5 Mhz.)  Same behavior.
Problem turned out to be in the TCO unit - had to be shipped to YAESU where 
they
did a solid repair, but it was not the normal easy 'give it to a friend' 
repair.
Rigs back, (after eight great years of use,) and is in top shape again.
Sorry to pass this news along.


gl es 73,


Todd, W9YK
Elmhurst, Illinois USA




At 10:55 AM 7/29/2004, you wrote:
>One of the 1000MPs that I use (serial # 5L040237), has no receive between
>6.5 and 12.0 MHz on the main receiver.
>
>
>
>The MAIN receiver is dead, but the sub-receiver can receive fine if I first
>tune the main receiver to just below 6.5MHz, press A>B, and then tune above
>6.5MHz on sub VFO-B ; the ATT switch works on the sub-receiver so I presume
>(?) its' not a front-end burn-out?
>
>
>
>My usual "radio repairman" will not be able to take this on for at least six
>weeks, so I need some URGENT help here!
>
>
>
>73
>
>
>
>Steve
>
>GW4BLE
>
>
>
>_______________________________________________
>1000mp mailing list
>1000mp at mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/1000mp