[1000mp] FL7000 and FT1000 MP MARK V

Sun, 06 Apr 2003 19:53:15 -0600

There may also be an Amp switch on the back of the Mark V, at least there is
one on the back of the MP that has to be moved to activate the amp.

Good luck

Sam
VE5SF
----- Original Message -----
From: "Jochen van Heek" <[email protected]>
To: "FT1000-List" <[email protected]>
Cc: "DO1BVW" <[email protected]>; "DL1EJA" <[email protected]>
Sent: Sunday, April 06, 2003 2:22 PM
Subject: [1000mp] FL7000 and FT1000 MP MARK V

Hello Gents !

I do have a FL7000 here and wanted to get it connected to the MARK V !
Everything working fine and I do get aprox. 500W from the amp on all bands !

One little question:
Both manuals (MP and FL) tell me:
You only have to connect the band data cable and the ALC line and everything
will be fine !

So I did.
And ???

No PTT happened to the FL when pushing the mike of the MP !

All other things fine besides the PTT of the FL !

When I connected the PTT line of the FL to the TX ground connector of my MP
everything is OK !

Is this a mistake in the manuals or could this be:

Checking all connectors I found out, that two little cables are not
connected to the white connector that goes into the FL7000 !
I do have connected:
orange(9), yellow(3),blue(5), red(2),white(7), green(4) and brown(1).
Black and grey are not connected and the contacts which are not used are 6
and 8 !

Could that be the reason why it doesn�t get PTT through the band data cable
?

Who can help please ?

Jochen !

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
_______________________________________________
List Moderator: Richard Lubash N1VXW
1000mp mailing list
[email protected]
To Change Options or Unsubscribe:
http://mailman.qth.net/mailman/listinfo/1000mp