[1000mp] FL7000 and FT1000 MP MARK V

Mon, 7 Apr 2003 08:14:47 +0200

This switch is only for the internal relais of the TX ground cinch, isn�t it
?

Regards !

Jochen !

----- Original Message -----
From: "Sam Ferris" <[email protected]>
To: <[email protected]>
Sent: Monday, April 07, 2003 3:53 AM
Subject: Re: [1000mp] FL7000 and FT1000 MP MARK V

> There may also be an Amp switch on the back of the Mark V, at least there
is
> one on the back of the MP that has to be moved to activate the amp.
>
> Good luck
>
> Sam
> VE5SF
> ----- Original Message -----
> From: "Jochen van Heek" <[email protected]>
> To: "FT1000-List" <[email protected]>
> Cc: "DO1BVW" <[email protected]>; "DL1EJA" <[email protected]>
> Sent: Sunday, April 06, 2003 2:22 PM
> Subject: [1000mp] FL7000 and FT1000 MP MARK V
>
>
> Hello Gents !
>
> I do have a FL7000 here and wanted to get it connected to the MARK V !
> Everything working fine and I do get aprox. 500W from the amp on all bands
!
>
>
>
> One little question:
> Both manuals (MP and FL) tell me:
> You only have to connect the band data cable and the ALC line and
everything
> will be fine !
>
> So I did.
> And ???
>
> No PTT happened to the FL when pushing the mike of the MP !
>
> All other things fine besides the PTT of the FL !
>
> When I connected the PTT line of the FL to the TX ground connector of my
MP
> everything is OK !
>
>
> Is this a mistake in the manuals or could this be:
>
> Checking all connectors I found out, that two little cables are not
> connected to the white connector that goes into the FL7000 !
> I do have connected:
> orange(9), yellow(3),blue(5), red(2),white(7), green(4) and brown(1).
> Black and grey are not connected and the contacts which are not used are 6
> and 8 !
>
> Could that be the reason why it doesn�t get PTT through the band data
cable
> ?
>
>
> Who can help please ?
>
> Jochen !
>
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
>   text/plain (text body -- kept)
>   text/html
> The reason this message is shown is because the post was in HTML
> or had an attachment.  Attachments are not allowed.  To learn how
> to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
> _______________________________________________
> List Moderator: Richard Lubash N1VXW
> 1000mp mailing list
> [email protected]
> To Change Options or Unsubscribe:
> http://mailman.qth.net/mailman/listinfo/1000mp
>
>
>
> _______________________________________________
> List Moderator: Richard Lubash N1VXW
> 1000mp mailing list
> [email protected]
> To Change Options or Unsubscribe:
> http://mailman.qth.net/mailman/listinfo/1000mp