[1000mp] Mark V Sensitivity and DSP

Sat, 9 Nov 2002 04:56:36 -0000

I have to disagree with some of the other replies. I find the DSP to be
useful
on SSB as well as CW. I usually have the noise reduction set to 'A' at all
times
on SSB and sometimes set it to 'B' in difficult situations. I'm also active
on
satellites and use my 1000mp as a downlink receiver for the AO40 satellite.
The
noise reduction set to 'B' takes out the noise on the downlink signal
completely
making the SSB signals, that would be a struggle to hear, easy copy.
Steve..AI7W

-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of J.R.
Sent: Saturday, November 09, 2002 03:20
To: [email protected]
Subject: [1000mp] Mark V Sensitivity and DSP

Thanks for the replies. I too have see better performance on CW with the
contour settings. Seeing I'm on CW about 25% of the time and SSB the rest,
SSB is where I would like the DSP to perform a little better. I have an
opportunity to do a side by side test with a TS-950SDX this weekend. I'll
let you know the results. As always, any comments/help is greatly
appreciated!

Thanks Again,

Joe
KC5DFP

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---
_______________________________________________
List Moderator: Richard Lubash N1VXW
1000mp mailing list
[email protected]
To Change Options or Unsubscribe:
http://mailman.qth.net/mailman/listinfo/1000mp