[1000mp] RASCAL and 1000MP

[Tony]

Todd,
   I saw the answer for the 1000MP MKV. If you have a plain 1000MP, there are user settings you can make to fool the packet mode into using USB (required for PSK31, MFSK, etc).

This is from an original message from Mark Erbaugh, N8ME on 4Apr01

=============================
From: "Mark Erbaugh" <mark@microenh.com>
Date: Wed, 4 Apr 2001 17:48:59 -0400
Subject: Re: [1000mp] Packet jack questions
Message-ID: <001c01c0bd51$15c8dda0$0f00000a@microenh>



The audio input on the Packet jack is only active in Packet mode. In RTTY
mode, the FT1000MP only works for FSK using the RTTY jack. If you want to do
AFSK RTTY you would need to use the Packet jack (or the microphone).

The Packet mode will work in either LSB or FM mode, but not USB. You can
however, create a USER mode that will work as a Pseudo USB packet mode (the
Mark V has an Easy-Set option for USB PSK31, but you can program the same
parameters manually on the original MP).

Here are the values for the EasySet modes on the Mark V (use a fixed pitch
font to make sense out of this):

Menu 8-6  EASY-SEt parameters

        | nodE   | dSP-oFSt | r-PLL  | r-cAr   | t-PLL  | t-cAr   | rttY-Sft
--------+--------+----------+--------+---------+--------+---------+---------
SStv-L  | PAc-Lo |  0.000   | -1.750 | 456.650 | -1.750 | 456.750 | 0.000
SStv-u  | PAc-Lo |  0.000   |  1.750 | 453.250 |  1.750 | 453.250 | 0.000
--------+--------+----------+--------+---------+--------+---------+---------
FAcS-L  | PAc-Lo |  0.000   | -1.900 | 456.900 | -1.900 | 456.900 | 0.000
FAcS-u  | PAc-Lo |  0.000   |  1.900 | 453.100 |  1.900 | 453.100 | 0.000
--------+--------+----------+--------+---------+--------+---------+---------
PS31-l  | PAc-Lo | -1.000   | -1.000 | 456.000 | -1.500 | 456.500 | 0.000
PS31-u  | PAc-Lo |  1.000   |  1.000 | 454.000 |  1.500 | 453.500 | 0.000
--------+--------+----------+--------+---------+--------+---------+---------
PS31-SL | LSB    | -1.000   | -1.450 | 456.450 | -1.500 | 456.500 | 0.000
PS31-Su | USB    |  1.000   |  1.450 | 453.550 |  1.500 | 453.500 | 0.000


The PS31-L and PS31-U settings are LSB and USB using the Packet jack.
The PS31-SL and PS31-SU settings are LSB and USB using the microphone input.


73,
Mark
----- Original Message -----
From: "Ronald Kenwood" <w3zv@hotmail.com>
To: <1000MP@qth.net>
Sent: Wednesday, April 04, 2001 11:44 AM
Subject: [1000mp] Packet jack questions


> I want to replace my RigBlaster with a connection between my soundcard and
> the Packet or AFSK jack.
>
> Is this jack only live when the MP is in Packet or RTTY mode?
>
> If it is live full time, do I run the risk of putting sound card audio on
> the air during phone operations?
>
> If it is not live full time, how do I deal with PSK31 which is normally
run
> in LSB or USB?
>
> Thanks, Ron
> W3ZV
At 08:52 PM 4/27/02 -0500, you wrote:
>Need some help
>
>Attempting to go digital with my MP and PC
>
>Purchased a RASCAL with Yaesu Microphone wiring
>
>
>Plugged it in and successfully can hear through the PC's speakers.  Can 
>successfully open WINPSK 2.2
>and copy PSK - Even tried MixW2 and copied both PSK, RTTY even SSTV
>
>Now the problem.
>
>Can't trigger the rig and feed data to the MP.
>
>First the Rascal comes with a cable to use serial port, which is in use 
>with DX4WIN as my CAT.
>The Rascal literature DOES SAY that this is not needed if you want to 
>operate VOX. Still does doesn't work.
>In fact, removed the rigs connection to the serial and used the Rascal's 
>and also failed.
>
>For PSK I'm using the PKT mode on the MP with both the PKT and the LSB 
>light being lit.
>For RTTY also both RTTY and LSB are lit.
>Is this correct?
>
>Can I use the Packet or RTTY terminals on the rear of the rig to feed the 
>signal from the PC's soundcard?
>
>Are there Menu settings to allow digital signals to feed through the mike 
>connection?
>
>What am doing wrong?
>
>
>Looking for an Elmer.
>
>73,
>
>Todd, W9YK
>Elmhurst, Illinois
>
>
>
>
>
>
>_______________________________________________
>List Moderator: Richard Lubash N1VXW
>1000mp mailing list
>1000mp@mailman.qth.net
>To Change Options or Unsubscribe:
>http://mailman.qth.net/mailman/listinfo/1000mp
>
>