[Yaesu] FW: Yaesu 1500

[Jim Hargrave]

-----Original Message-----
From: Jim Hargrave [mailto:w5ifp at gvtc.com]
Sent: Friday, September 06, 2013 4:03 PM
To: geraldj at netins.net
Subject: RE: [Yaesu] Yaesu 1500


Ken,

Since the TTP works, that helps isolate it. Generally the TTP goes in a
hi-level point in the audio train. Since the TTP works, I would suspect the
Mic pre-amp or circuitry surrounding it. You could just have a broken wire
behind the Mic connector.
Also look at your menus. It may have a setting that mutes the Mic or a mute
switch on the Mic.

    73s de Jim
       W5IFP





  > On 9/6/2013 3:26 PM, Ken wrote:
  > > Thanks to everyone that responded giving clues of what to look for.  I
  > > tried 3 Mic's, swapped  elements. My touch tones work, I
  > found out that
  > > tones go in on a separate lead.  Its some thing in radio.
  > >
  > > 73's  Ken


  > > Home: http://mailman.qth.net/mailman/listinfo/yaesu
  > > Help: http://mailman.qth.net/mmfaq.htm
  > > Post: mailto:Yaesu at mailman.qth.net
  > >
  > > This list hosted by: http://www.qsl.net
  > > Please help support this email list: http://www.qsl.net/donate.html
  > >
  > >
  >
  > ______________________________________________________________
  > Yaesu mailing list
  > Home: http://mailman.qth.net/mailman/listinfo/yaesu
  > Help: http://mailman.qth.net/mmfaq.htm
  > Post: mailto:Yaesu at mailman.qth.net
  >
  > This list hosted by: http://www.qsl.net
  > Please help support this email list: http://www.qsl.net/donate.html