[Yaesu] FT-857D IF filters

[David VE3VID]

" It matters not which position menu 64 is in."
So how do you select the IF filter to be inline?  I can not find that in the manual.  There's a section on installing the filter(s), but nothing on how to switch it in/out.
Davidhttp://www.ve3vid.webs.com/



> From: k8vf_mark at centurytel.net
> To: ve3vid at hotmail.com
> Subject: Re: [Yaesu] FT-857D  IF  filters
> Date: Tue, 13 Aug 2013 16:56:40 -0400
> 
> My 897 (same rig in different box) allows me to put either filter  on in LSB 
> or USB.
> It matters not which position menu 64 is in.
> My manual from 2006 says menu 64 is not available at this time.
> 
> 
> k8vf
> Mark
> 
> 
> 
> 
> ----- Original Message ----- 
> From: "David VE3VID" <ve3vid at hotmail.com>
> To: "Yaesu listserver" <yaesu at mailman.qth.net>
> Sent: Tuesday, August 13, 2013 2:11 PM
> Subject: [Yaesu] FT-857D IF filters
> 
> 
> > Hi and thanks for reading this post.
> > I would like to add the optional 500hz IF filter from INRAD to use in AFSK 
> > RTTY from my 857D.   The INRAD #705 is sold as a CW filter.
> > Will the 857D allow me to activate the IF filter even when in SSB for 
> > AFSK?   Is this what Menu op#064 does?  The manual is really vague on 
> > this.
> > Any help is really appreciated.  Thanks73David
> >
> >    VE3VID
> > http://www.ve3vid.webs.com/
> >
> > ______________________________________________________________
> > Yaesu mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/yaesu
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Yaesu at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > 
>