[Yaesu] FT 100 POWER CORD

[Scott Townley]

You essentially have two options:
(1) buy a second matching connector.  Powerwerx has them.
(2) cut off the original connector and substitute it with something more common/you have more of.  Many folks I've talked to have cut the original connector off and switched to 35amp Anderson powerpoles.
As the powerpoles seem to be quite popular, that probably would be the best long-term solution.

> 
> From: Jim Gerke <Jim.Gerke at verizon.net>
> Date: 2004/11/14 Sun AM 11:34:05 EST
> To: nickn9hno <nickn9hno at netzero.net>
> CC: Yaesu at mailman.qth.net
> Subject: Re: [Yaesu] FT 100 POWER CORD
> 
> Nick,
> 
> Since the FT100/FT100D are the only ham rigs that use a power cord with 
> that particular connector, I doubt you'll find an aftermarket supplier. 
> You'll probably have to bite the bullet and buy a new one. You need to 
> call around and check the pricing as there can be as much as a $10 
> variation between dealers.
> 
> 73, Jim K5QL
> 
> nickn9hno wrote:
> > HELLO TO THE GROUP,
> > Can anyone tell me who sells a aftermarket power cord for the FT 100 mobil.
> > I want to try it as a base unit and i dont want to remove the power cord from the van.
> > also I have a complete FT 707 station for sale that is in very good condition, it includes the digital vfo, power supply and the antenna tuner and transverter.and of course the radio and mic.
> > THANKS IN ADVANCE
> > NICK/N9HNO
> > _______________________________________________
> > Yaesu mailing list
> > Yaesu at mailman.qth.net
> > http://mailman.qth.net/mailman/listinfo/yaesu
> > 
> > 
> 
> _______________________________________________
> Yaesu mailing list
> Yaesu at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/yaesu
> 

Scott Townley NX7U
Gilbert, AZ  DM43di