[Yaesu] FT-920

[va3pl at cuic.ca]

Thanks Bill
Is that mean the FT-920 is no longer being manufactured?
Andy - VA3PL


----- Original Message -----
From: "William Shadid" <wa9mxq at att.net>
To: "Yaesu Reflector (QTH)" <yaesu at mailman.qth.net>
Sent: Wednesday, June 23, 2004 11:51 AM
Subject: Re: [Yaesu] FT-920


> Andy,
>
> The FT-920 is a very good radio. I just bought one of the last ones
> available new -- made in late 2003.
>
> The radio has provisions for a Narrow CW Filter with only a 500 Hz unit
> being available from Yaesu. INRAD has others, however. When the narrow
> filter is installed, "Wide" is the SSB Filter and "Narrow" is the 500 Hz
(or
> whatever you install) unit. "Narrow" is selected with a dedicated button
on
> the front panel. That same filter also works in Data modes.
>
> INRAD makes and markets some additional circuit assemblies for the FT-920
> that really enhance filter selection and flexibility. You might also check
> out their web site for details.
>
> 73,
>
> -Bill, WA9MXQ
>
>
> ----- Original Message -----
> From: "va3pl at cuic.ca" <va3pl at cuic.ca>
> To: <yaesu at mailman.qth.net>
> Sent: Wednesday, 23 June 2004 8:44 AM
> Subject: [Yaesu] FT-920
>
>
> > I am contemlaiting to get a Yaesu FT-920
> > Are there slots for CW WIDE and CW NARROW filters?
> >
> > Andy - VA3PL
> >
> > _______________________________________________
> > Yaesu mailing list
> > Yaesu at mailman.qth.net
> > http://mailman.qth.net/mailman/listinfo/yaesu
>
> _______________________________________________
> Yaesu mailing list
> Yaesu at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/yaesu
>