[Yaesu] Contest Operating with FT-1000D and (Write Log) Software Program

Mon, 27 Jan 2003 06:27:18 -0800

My web site www.n6rk.com has a schematic
of the circuit I use with my FT-1000D
to run Writelog.  It also works fine with
DX Base.  You don't need an extra serial
port.

Rick Karlquist    N6RK
[email protected]
www.n6rk.com
www.karlquist.com

> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]]On
> Behalf Of Jim Dunbar
> Sent: Saturday, January 25, 2003 7:53 PM
> To: [email protected]
> Subject: [Yaesu] Contest Operating with FT-1000D and (Write Log)
> Software Program
>
>
> Hello,
>
> I was wondering if anyone had any experience with setting
> up an FT-1000D
> with the Write-Log Contest Software program and what
> specific cables were
> necessary to interconnect between the radio and the computer.
>
> I have a Toshiba Tecra Laptop with a built in sound card,
> and I also have a
> DB-9 serial connection available on Com 1.
>
> If I was to have the computer generate the CW via the DB-9
> serial port,
> would I need another serial port to run the radio control
> from the computer
> to the CAT Din jack on the radio?
>
> What other audio cables would I need to run between the
> Radio and the
> computer's sound card for voice keying?
>
> Thanks in Advance,
>
> Jim Dunbar
> K4PV
>
>
>
> Moderator: Ray Brown, KB�STN
> _______________________________________________
> Yaesu mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/yaesu
>