[Yaesu] Yaesu Rotator

Mon, 28 Jan 2002 01:12:36 +0000

Thanks Morris...73, Tom


At 18:55 01/27/02 -0600, you wrote:
>   http://www.rotordoc.com/
>http://www.ac6v.com/dealers.htm#REPAIR
>
>Hi above are two links to repair sites, I emailed one about a rotor of 
>mine while back and got a helpful responce. Sorry I dont know anything 
>about your rotor. Good luck.
>Morris WA4MIT
>
>--
>
>On Sun, 27 Jan 2002 20:56:51
>  Tom Horton wrote:
> >Howdy,
> >
> >  I hope someone here has experience with the little G-450XL Yaesu rotor.
> >I have been having problems with mine.
> >Had it down for a while and checked it out the other day and it worked 
> fine on
> >the bench. Reinstalled it and it worked fine for a while.After several
> >rotations,
> >it quit again in the same manner as before. The previous problem was
> >thought to be a bad cable. I repaired the cable and as I said above, the
> >rotator worked.
> >
> >  What it is doing now, as was the last time, when you press either the
> >right or left direction
> >switch, it sorta hangs there and then the indicator just takes off and runs
> >full scale around
> >the face of the dial...BUT, the rotator does not move.
> >
> >I really am at a loss as to what is wrong. I have spoken to some rotator 
> repair
> >shops but no one except Yaesu works on these.
> >
> >If you have an idea of what the problem might be, please e-mail direct to
> >[email protected].
> >
> >A friend has a Yaesy 800 rotor, and we are wondering if his 800 controller
> >would work on mine just to eliminate that part.  I know they are definately
> >different,but would it be a possibility to use it for troubleshooting?
> >
> >Thanks for listening...
> >73, Tom K5IID
> >
> >_______________________________________________
> >Yaesu mailing list
> >[email protected]
> >http://mailman.qth.net/mailman/listinfo/yaesu
> >
>
>
>_______________________________________________
>Yaesu mailing list
>[email protected]
>http://mailman.qth.net/mailman/listinfo/yaesu