[Yaesu] Yaesu Rotator

[Morris Wideman]

  http://www.rotordoc.com/
http://www.ac6v.com/dealers.htm#REPAIR

Hi above are two links to repair sites, I emailed one about a rotor of mine while back and got a helpful responce. Sorry I dont know anything about your rotor. Good luck. 
Morris WA4MIT

--

On Sun, 27 Jan 2002 20:56:51  
 Tom Horton wrote:
>Howdy,
>
>  I hope someone here has experience with the little G-450XL Yaesu rotor.
>I have been having problems with mine.
>Had it down for a while and checked it out the other day and it worked fine on
>the bench. Reinstalled it and it worked fine for a while.After several 
>rotations,
>it quit again in the same manner as before. The previous problem was
>thought to be a bad cable. I repaired the cable and as I said above, the 
>rotator worked.
>
>  What it is doing now, as was the last time, when you press either the 
>right or left direction
>switch, it sorta hangs there and then the indicator just takes off and runs 
>full scale around
>the face of the dial...BUT, the rotator does not move.
>
>I really am at a loss as to what is wrong. I have spoken to some rotator repair
>shops but no one except Yaesu works on these.
>
>If you have an idea of what the problem might be, please e-mail direct to 
>k5iid@ntelos.net.
>
>A friend has a Yaesy 800 rotor, and we are wondering if his 800 controller 
>would work on mine just to eliminate that part.  I know they are definately 
>different,but would it be a possibility to use it for troubleshooting?
>
>Thanks for listening...
>73, Tom K5IID 
>
>_______________________________________________
>Yaesu mailing list
>Yaesu@mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/yaesu
>