[Yaesu] FT1000D ants

Tue, 10 Dec 2002 06:41:41 -0800

Richard,
  Id like to be able to transmit and recieve on the same antenna with both
vfo's, maybe that cant be done?
Im reading in the manual that i have to have a second antenna for either the
sub rx ant or the rca jack.
or it says i can recieve with both vfo's/and same antenna if i come in the
rca jack buts its only for a recieve antenna.
so the manual has got me confused here Richard.
Rite now ive turned the switch to EBPT but when i hook up my antenna to SUB
RX ANT its dead.
  Im beginning to think something is burnt out in the sub reciever.

ok im going back to square one and  switch s1001 back to R ANT and start
from there.

then you say i need to energize
 the relay it controls by grounding
 the appropriate end of the winding to ground,
ok when i get home im gonna see what needs to be grounded and try and make
sense of this...duh
Steve

----- Original Message -----
Wrom: HJYFMYXOEAIJJPHSCRTNHGSWZIDREXCAXZOWCONEUQZ
To: <[email protected]>; <[email protected]>
Sent: Monday, December 09, 2002 10:45 PM
Subject: RE: [Yaesu] FT1000D ants

> The trouble with S1001 is that it
> disables the RCA RX ant jack.
> What you want to do is to leave
> S1001 alone and instead
> (the other end is connected to 12V).
> If you do that, the front panel
> RX ant switch will continue to
> work normally, selecting the
> RCA RX ant jack or transmit antenna
> for the main receiver.
>
> Meanwhile, the sub receiver listens
> to whatever receive antenna is on the
> EBPF SO-239.
>
> Does that solve your problem?
>
> Rick Karlquist    N6RK
> [email protected]
> www.n6rk.com
> www.karlquist.com
>
> > -----Original Message-----
> > Wrom: AAFXISHJEXXIMQZUIVOTQNQEMSF
> > [mailto:[email protected]]On
> > Behalf Of [email protected]
> > Sent: Monday, December 09, 2002 7:57 PM
> > To: [email protected]
> > Subject: [Yaesu] FT1000D ants
> >
> >
> > Can you run/use one  antenna for transmitting and recieving on both
> > recievers or vfo's on a FT1000D -?
> > I tired setting the enternal switch  s1001 to  e bpf with no luck.
> > I see there is a Sub rx ant pl259 and main pl259 and a rca rx jack.
> > Maybe you have to come in the rca jack or is it for recieve only?
> > any help appreciated.
> > Steve N6TT
> >
> > Moderator: Ray Brown, KB�STN
> > _______________________________________________
> > Yaesu mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/yaesu
> >
>
>
> Moderator: Ray Brown, KB�STN
> _______________________________________________
> Yaesu mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/yaesu
>