[Wswss] WR90 needed for KH6

[Chip Angle]

Hola,

I need three relatively tight radius WR90 E bends for the Hawaiian 
x-band project.  I have larger radius ones but it would make Paul's 
TWTA setup  more efficient for room in his shack with the tighter 
radius ones.  A single tight 180 degree E plane bend and one 90 would 
be best but three tight 90 degree E plane bends would be just great.

I will pay for them of course and shipping if necessary.  I can use 
dinged flanges as well as they can be flattened on the mill.

I hope to pick them up at the next SBMS meeting in a week July 1st in Corona.

Feed and feed mounting components are nearly complete for Paul's 
setup on his new mounted Prodelin 1.2 meter dish.  Sun noise 
measurements on the feed assembly are great and will be shipping all 
feed and feed line components to Paul late next week after painting 
and weather proofing.

See:  
http://www.ham-radio.com/n6ca/appnotes/xband_const/hme_const.html for 
updates and pictures.

Thanks

Chip N6CA
310.539.5395