[TVARC] ICOM 7000 AM mode

[Larry Sheridan]

Hi Mike -

Not familiar with the 7000 specifically but have had radios in the past
that had selectable IF filters, where if you switched to a narrower filter
on AM,
it didn't pass anything ... maybe the 7000 might be doing the same thing?
Just thinking out loud ...

Regards,

Larry K8XR




On Sun, Nov 17, 2024 at 6:09 PM Michael Bornstein <drmikeb399 at gmail.com>
wrote:

> I have an ICOM 7000 that I bought many years ago but kept in storage until
> recently. It works perfectly in SSB but when I turn it to AM I cannot
> receive anything. I first noticed it when tuning to a SWBC band and
> received an international station but only in SSB. I then tried our AM
> broadcast band and again received nothing in AM, but only in SSB. Are there
> any tricks or is my AM for some reason nonfunctioning. I would like to use
> this radio as both an SWL radio and a ham radio. I have no intention of
> broadcasting in AM.
> Mike,
> K6UMO
> ______________________________________________________________
> TVARC mailing list
> Home: http://mailman.qth.net/mailman/listinfo/tvarc
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:TVARC at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/tvarc/attachments/20241117/f5b0a459/attachment.html>