[TVARC] Fuses

[Larry Sheridan]

Hi Rich -

I have some Littlefuse glass fuses rated at 1A, they look a lot like the
MDQ-1 on your data sheet, you are welcome to swing by if you want to try
some.

Larry K4LES


On Mon, Apr 11, 2022 at 12:53 PM Rich Antolick <ra77 at rantolick.net> wrote:

> My Heathkit HD-1430 keyer died at Radio Rodeo on Saturday.  I found a
> blown fuse in it.  It functions and draws nominal current when powered from
> 12 volts.  The bridge diodes measure OK as does the capacitors and neon
> light on the primary side of the transformer.  The fuse in it is a 1/16 amp
> MDQ dual element time delay fuse (datasheet attached) which is proving hard
> to find.  Does anyone have something like that, even in a somewhat higher
> current?
>
>
>
> Thanks,
>
> Rich
>
> W4RJA
> ______________________________________________________________
> TVARC mailing list
> Home: http://mailman.qth.net/mailman/listinfo/tvarc
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:TVARC at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/tvarc/attachments/20220411/8271c088/attachment.html>