Hi Rich -

I have some Littlefuse glass fuses rated at 1A, they look a lot like the MDQ-1 on your data sheet, you are welcome to swing by if you want to try some.

Larry K4LES


On Mon, Apr 11, 2022 at 12:53 PM Rich Antolick <ra77@rantolick.net> wrote:

My Heathkit HD-1430 keyer died at Radio Rodeo on Saturday.  I found a blown fuse in it.  It functions and draws nominal current when powered from 12 volts.  The bridge diodes measure OK as does the capacitors and neon light on the primary side of the transformer.  The fuse in it is a 1/16 amp MDQ dual element time delay fuse (datasheet attached) which is proving hard to find.  Does anyone have something like that, even in a somewhat higher current?

 

Thanks,

Rich

W4RJA

______________________________________________________________
TVARC mailing list
Home: http://mailman.qth.net/mailman/listinfo/tvarc
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:TVARC@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html