[TVARC] FT-8 frequencies

[K2PS Pete Stafford]

Has anyone looked into the "Clone" feature?  I'm thinking that you could
replace the normal settings and frequencies with a Baker Island
configuration and so not mess with the existing, working config.

Haven't had a chance yet to play with this, but maybe someone can try it.

Pete, K2PS

-----Original Message-----
From: tvarc-bounces at mailman.qth.net [mailto:tvarc-bounces at mailman.qth.net]
On Behalf Of k2te at juno.com
Sent: Tuesday, June 26, 2018 7:57 AM
To: earleiphone at gmail.com
Cc: tvarc at mailman.qth.net
Subject: Re: [TVARC] FT-8 frequencies

Earle,

If you have WSJT-X V1.9.0, open the program.  Hit F2 to go to settings. 
Select the "frequencies" tab and you will see the default frequencies
that are normally used for FT8.  Right-click on any line and enter the
Baker Island frequencies in MHz form (10.131, for example).  Do this for
each of the frequencies the dxpedition plans to use.  The program will
automatically sort them so that when you hit the drop-down menu for a
band, you can scroll down and select it.

73 de Ed

____________________________________________________________
How To Remove Eye Bags & Lip Lines Fast (Watch)
Fit Mom Daily
http://thirdpartyoffers.juno.com/TGL3141/5b322a2a1069c2a291727st03vuc
______________________________________________________________
TVARC mailing list
Home: http://mailman.qth.net/mailman/listinfo/tvarc
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:TVARC at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


---
This email has been checked for viruses by AVG.
https://www.avg.com