[TrunkCom] Pro 96 Problems

[shawn collier]

Hey again all,



The pro 96 is scanning fine.  But on the analog side I get a wailing noise at times, like feedback.  I have to tap the radio to stop it.  Also when I tap the radio and there is traffic, I can hear an echo of my taps.   I played with it a little bit last night, and  found that the feedback happened when I wiggled the antenna.  So I took it off and gently used my air compressor to blow out the coaxile on the radio and the antenna.  I didn't want to chance playing around with it anymore since I have one month left on an exstended warranty.  Since I blew out the coaxiles the feedback has stopped, but the tapping echo is still there.  This is only on the analog side, digital is fine.  So it can't be a speaker issue.  Thinking that the board might be loose inside, but then it would do it on both A and D.  I noticed earlier that when I tapped the radio, the digital would go dead.  Thinking about getting another warranty for 30 bucks or sending it in right away before the 6/15
 deadline.  Any thoughts would be greatly appreciated.





Thanks very much.  Hope all is well with everyone,

shawn
Connecticut