[TrunkCom] Radio Shack PRO-433 scanner

[dmccorm at charter.net]

It's an analog only TrunkTracker III ( LTR Standard,Motorola, EDACS, analog only). As for cloning with the 528, it will semi-clone, as the 528 does not have the Mil-Air band coverage, that the 433 does.

---- "Arthur-Bryan E. Phelps" <aphelps at enter.net> wrote: 
> PRO-433 Specs:
> 
> http://www.scannermaster.com/RadioShack_PRO_433_Scanner_p/22-501116.htm 
> 
> -----Original Message-----
> From: trunkcom-bounces+aphelps=enter.net at mailman.qth.net
> [mailto:trunkcom-bounces+aphelps=enter.net at mailman.qth.net] On Behalf Of
> Jeff Kenyon
> Sent: Friday, February 09, 2007 11:18 PM
> To: Discussion of Monitoring Trunk Radio Systems
> Subject: Re: [TrunkCom] Radio Shack PRO-433 scanner
> 
> I'm assuming then it handles P-25, what about 700 MHz?
> 
> 
> 
> 
> 
> On Fri, 9 Feb 2007, David Pechon wrote:
> 
> > Yes the Pro-433 is new its an 06 model, which I think it close to the 
> > unidin Pro-2052.  So far I love it. It will scan up to 1.3gHz.  Also 
> > what I have found out it can also be upgraded when the FCC change 
> > bands. You can program it from the keypad or via a radio/computer 
> > interface. Plus you can use this one to clone another 433 or the PRO-528.
> >
> > ______________________________________________________________
> > TrunkCom mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/trunkcom
> > Help: http://mailman.qth.net/mmfaq.html
> > Post: mailto:TrunkCom at mailman.qth.net
> >
> ______________________________________________________________
> TrunkCom mailing list
> Home: http://mailman.qth.net/mailman/listinfo/trunkcom
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:TrunkCom at mailman.qth.net
> 
> ______________________________________________________________
> TrunkCom mailing list
> Home: http://mailman.qth.net/mailman/listinfo/trunkcom
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:TrunkCom at mailman.qth.net