[TrunkCom] PRO-97

[mws72 at qconline.com]

I know that, I wanted to know is if anyone as seen this or knows as to  why does the PRO-97 shows it as "1" and the BC780XLT shows it has a "0" for the same system. 


Michael W. Scheel N0NGL 
Davenport, Iowa
WWW.QUADCITIESSCAN.COM  

-----Original Message-----
From: "Ken R." <kenr55 at bellsouth.net>
Date: Thu, 19 Apr 2007 19:08:39 
To:<mws72 at qconline.com>,"Discussion of Monitoring Trunk Radio Systems" <trunkcom at mailman.qth.net>
Subject: Re: [TrunkCom] PRO-97

The first digit is the area code, it will always be either a one 
or a zero. If an area code is showing up as a zero on a 
particular system, then all talkgroups on that system should 
start with a zero.

Ken, W4KRR


----- Original Message ----- 
From: <mws72 at qconline.com>
To: "Trunkcom (e)," <trunkcom at mailman.qth.net>
Sent: Thursday, April 19, 2007 6:53 PM
Subject: [TrunkCom] PRO-97


>I have checking out a UHF LTR system with PRO-97  and I noticed 
>the scanner was displaying the TGs with a "one" in the first 
>position but when I program the system into a BC780XLT the TGs 
>have a "zero" in the first position. Anyone else seen this?
>
>
>
> Michael W. Scheel N0NGL
> Davenport, Iowa
> WWW.QUADCITIESSCAN.COM
> ______________________________________________________________
> TrunkCom mailing list
> Home: http://mailman.qth.net/mailman/listinfo/trunkcom
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:TrunkCom at mailman.qth.net
>